Command Line Interface Guide

1696 Syslog Commands
logging console
Use the logging console command in Global Configuration mode to limit
messages logged to the console based on severity. To disable logging to the
console terminal, use the no form of this command.
Syntax
logging console [ severity–level ]
no logging console
Parameter Description
Default Configuration
The default value for level is warnings.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Parameter Description
severity–level (Optional) The number or name of the desired severity level.
Range:
[0 | emergencies]
[
1 | alerts]
[
2 | critical]
[
3 | errors]
[
4 | warnings]
[
5 | notifications]
[
6 | informational]
[
7 | debugging]
2CSPC4.X8100-SWUM100.book Page 1696 Wednesday, August 29, 2012 6:23 PM