Command Line Interface Guide

1698 Syslog Commands
logging file
Use the logging file command in Global Configuration mode to limit syslog
messages sent to the logging file based on severity. To cancel the buffer, use
the no form of this command.
Syntax
logging file [ severity–level-number | type ]
no logging file
Parameter Description
Default Configuration
The default severity level is error.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Parameter Description
severity–level–number (Optional) The number or name of the desired severity
level. Range:
[0 | emergencies]
[
1 | alerts]
[
2 | critical]
[
3 | errors]
[
4 | warnings]
[
5 | notifications]
[
6 | informational]
[
7 | debugging]
2CSPC4.X8100-SWUM100.book Page 1698 Wednesday, August 29, 2012 6:23 PM