Command Line Interface Guide

Syslog Commands 1699
Example
The following example limits syslog messages sent to the logging file based on
the severity level "warning."
console(config)#logging file warning
logging monitor
Use the logging monitor command in Global Config mode to enable logging
messages to telnet and SSH sessions with the default severity level.
Use the no logging monitor command to disable logging messages.
Syntax
logging monitor <severity>
no logging monitor
Parameter Description
Default Configuration
The default severity value is warnings.
Parameter Description
severity-level (Optional) The number or name of the desired severity level.
Range:
[0|emergencies]
[1|alerts]
[2|critical]
[3|errors]
[4|warnings]
[5|notifications]
[6|informational]
[7|debugging]
2CSPC4.X8100-SWUM100.book Page 1699 Wednesday, August 29, 2012 6:23 PM