Command Line Interface Guide

1702 Syslog Commands
Default Configuration
Disabled.
Command Mode
Global Configuration mode
User Guidelines
To see web session logs use the show logging command.
Example
console(config)#logging web-session
<133> MAR 24 07:46:07 10.131.7.165-2 UNKN[83102768]:
cmd_logger_api.c(140) 764 %%
WEB:10.131.7.67:<<UNKNOWN>>:EwaSessionLookup :
session[0] created
<133> MAR 24 07:46:07 10.131.7.165-2 UNKN[83102768]:
cmd_logger_api.c(140) 765 %%
WEB:10.131.7.67:admin:User admin logged in
port
Use the port command in Logging mode to specify the port number of syslog
messages. To reset to the default value, use the no form of the command.
Syntax
port port
no port
Parameter Description
Parameter Description
port The port number for syslog messages. (Range: 1-65535)
2CSPC4.X8100-SWUM100.book Page 1702 Wednesday, August 29, 2012 6:23 PM