Command Line Interface Guide

Syslog Commands 1703
Default Configuration
The default port number is 514.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the
command can be executed to set the port number for the server.
Example
The following example sets the syslog message port to 300.
console(config-logging)#port 300
show logging
Use the show logging command in Privileged EXEC mode to display all
logging information, including auditing status.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the state of logging and the syslog messages
stored in the internal buffer.
2CSPC4.X8100-SWUM100.book Page 1703 Wednesday, August 29, 2012 6:23 PM