Command Line Interface Guide

1716 System Management Commands
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
The exec banner can consist of multiple lines. Enter a quote to complete the
message and return to configuration mode.
Example
console(config-telnet)# no exec-banner
hardware profile portmode
Use the hardware profile portmode command in Interface Config mode to
configure a 40G port in 4x10G mode or 1x40G mode.
Use the no form of the command to return the port to the default mode
(1x40G).
Syntax
hardware profile portmode {1x40g|4x10g}
no hardware profile portmode
Parameter Description
Default Configuration
By default, 40G ports are configured in 1x40G mode.
Parameter Description
1x40g Configure the port as a single 40G port using 4 lanes.
4x10g Configure the port as four 10G ports, each on a separate lane.
This mode requires the use of a suitable 4x10G to 1x40g pigtail
cable.
2CSPC4.X8100-SWUM100.book Page 1716 Wednesday, August 29, 2012 6:23 PM