Command Line Interface Guide

1720 System Management Commands
Syntax
login-banner
no login-banner
• MESSAGE — Quoted text
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
This command has no user guidelines.
Example
console(config-telnet)# no login-banner
media-type
Select the media-type command for the interface. This command is only
valid on combo ports.
Syntax
media-type { auto-select [rj45 | sfp ] | rj45 | sfp }
Parameter Description
Parameter Description
auto-select rj45 Utilize RJ45 media when both media types are active.
auto-select sfp Utilize the SFP media when both media types are active.
auto-select Return the selection to the default (auto-select sfp)
rj45 Force connection on the RJ45 port. Power off SFP media port.
sfp Force connection on the SFP port. Power off RJ45 media port.
2CSPC4.X8100-SWUM100.book Page 1720 Wednesday, August 29, 2012 6:23 PM