Command Line Interface Guide

1728 System Management Commands
• PowerConnect 7048R-RA
•CX4 Expansion Card
• 10GBaseT Expansion Card
•SFP+ Expansion Card
Use the no form of the command to return the unit/slot configuration to the
default value.
Syntax
slot unit/slot cardindex
no slot unit/slot
• unit/slot — The slot identifier of the slot.
• cardindex — The index into the database of the supported card types
(see
show supported cardtype ) indicating the type of card being
preconfigured in the specified slot. The card index is a 32-bit integer.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
The card index (CID) can be obtained by executing the show supported
cardtype
command in User EXEC mode.
show banner
Use the show banner command to display banner information.
Syntax
show banner
Default Configuration
This command has no default configuration.
2CSPC4.X8100-SWUM100.book Page 1728 Wednesday, August 29, 2012 6:23 PM