Command Line Interface Guide

1732 System Management Commands
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.
Example
Console#show cut-through mode
Current mode : Enable
Configured mode : Disable (This mode is effective on
next reload)
show hardware profile
Use the show hardware profile command in Privileged EXEC mode to display
the hardware profile information for the 40G ports. The user can optionally
specify an interface or all 40G interfaces are displayed.
Syntax
show hardware profile portmode [interface-id]
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
console#show hardware profile portmode
Configured Running
2CSPC4.X8100-SWUM100.book Page 1732 Wednesday, August 29, 2012 6:23 PM