Manualshelf

Command Line Interface Guide

ManualsBrandsDell ManualsserversDell PowerConnect 8100 Series
1731173217331734173517361737173817391740
1734 System Management Commands
Example
console#show interfaces advanced firmware
Port Revision Part number
-------- ----------- -----------
Te1/0/1 0x411 BCM8727
Te1/0/2 0x411 BCM8727
Te1/0/3 0x411 BCM8727
Te1/0/4 0x411 BCM8727
Te1/0/5 0x411 BCM8727
show interfaces media-type
Use the show interfaces media-type command in Privileged EXEC mode to
display the configured and active media type for the combo ports.
Syntax
show interfaces media-type
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
Parameter Description
auto-select rj45 Utilize RJ45 media when both media types are active.
auto-select sfp Utilize the SFP media when both media types are active.
rj45 Force connection on the RJ45 port. Power off SFP media port.
sfp Force connection on the SFP port. Power off RJ45 media port.
2CSPC4.X8100-SWUM100.book Page 1734 Wednesday, August 29, 2012 6:23 PM