Command Line Interface Guide

System Management Commands 1737
Warm Restart Ready............................. Yes
Copy of Running Configuration to Backup Unit:
Status...................................... Stale
Time Since Last Copy........................ 0 days
4 hrs 53 mins 22 secs
Time Until Next Copy........................ 28
seconds
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
show power-usage-history
Use the show power-usage-history command in Privileged EXEC mode to
display the history of unit power consumption for the unit specified in the
command and total stack power consumption. Historical samples are not
saved across switch reboots/reloads.
Syntax
show power-usage-history unit-id
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
unit-id Stack unit for which to display the power history. Range 1-12.
2CSPC4.X8100-SWUM100.book Page 1737 Wednesday, August 29, 2012 6:23 PM