Command Line Interface Guide

1738 System Management Commands
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show power-usage-history unit 1
Sampling Interval (sec)........................ 30
Total No. of Samples to Keep................... 168
Current Power Consumption (mWatts)............. 56172
Sample Time Since Power Power
No. The Sample Consumption Consumption
Was Recorded On This Unit Per Stack
(mWatts) (mWatts)
------ -------------------- ----------- -----------
3 0d:00:00:13 56172 56172
2 0d:00:00:43 56172 56172
1 0d:00:01:12 54360 54360
show process cpu
Use the show process cpu command to check the CPU utilization for each
process currently running on the switch.
Syntax
show process cpu
2CSPC4.X8100-SWUM100.book Page 1738 Wednesday, August 29, 2012 6:23 PM