Command Line Interface Guide

System Management Commands 1755
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
Per Unit Status Parameters are explained as follows:
Example – Switch Firmware Stack Status
The following example displays the Switch Firmware stack status information
for the switch.
console#show switch
Management Standby Preconfig Plugged-in
Switch Code
SW Switch Status Model ID Model ID
Status Version
--- ---------- --------- ------------- -------------
------------- ---------
1 Mgmt Sw ANFirebolt-48 ANFirebolt-48
OK 4.12.17.37
2 Stack Mbr ANFirebolt-24 ANFirebolt-24
Updating Code 13.4.8.42
console#show switch 1
Switch............................ 1
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No —
2CSPC4.X8100-SWUM100.book Page 1755 Wednesday, August 29, 2012 6:23 PM