Command Line Interface Guide

System Management Commands 1757
2ANFirebolt-48ANFirebolt-48SDM Mismatch 2.24.17.48
show system
Use the show system command in User EXEC mode to display system
information.
Syntax
show system [ unit ]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
show system fan
Use the show system fan command in User EXEC or Privileged EXEC mode
to explicitly display the fan status.
Syntax
show system fan
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM100.book Page 1757 Wednesday, August 29, 2012 6:23 PM