Command Line Interface Guide

1758 System Management Commands
User Guidelines
This command has no user guidelines.
Example
console>show system fan
Fans:
Unit Description Status
---- ----------- ------
1 Fan 1 OK
1 Fan 2 OK
1 Fan 3 OK
show system id
Use the show system id command in User EXEC mode to display the system
identity information.
Syntax
show system id [ unit ]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
2CSPC4.X8100-SWUM100.book Page 1758 Wednesday, August 29, 2012 6:23 PM