Command Line Interface Guide

176 Using the CLI
Tunnel Interfaces
Tunnel interfaces are represented in the CLI by the variable tunnel-id , which
can assume values from 0–7.
Examples
Example #1
gigabitethernet 1/0/1
gigabitethernet1/0/1 (there is no space)
gi 1/0/1
gi1/0/1 (there is no space)
port-channel 1
vl 5
Example #2
console#show vlan
VLAN Name Ports Type
----- --------------- ------------- --------------
1 default Po1-48, Default
Gi1/0/1-24
2CSPC4.X8100-SWUM100.book Page 176 Wednesday, August 29, 2012 6:23 PM