Command Line Interface Guide

System Management Commands 1767
-----------------------------------------------------
-------------
unit image1 image2 current-active next-
active
-----------------------------------------------------
------------
1 K.3.9.1 0.0.0.0 image1 image1
2 K.3.9.1 0.0.0.0 image1 image1
stack
Use the stack command in Global Configuration mode to set the mode to
Stack Global Config.
Syntax
stack
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines. If not stack configuration appears in
the saved config, it is built at runtime and appears in the running config. The
operator can save the stack configuration. Stack members that do not match
the saved config after a reboot will show a config mismatch and do not join
the stack.
Example
The following example sets the mode to Stack Global Config.
console(config)#stack
2CSPC4.X8100-SWUM100.book Page 1767 Wednesday, August 29, 2012 6:23 PM