Command Line Interface Guide

System Management Commands 1771
Parameter Description
Keywords Table
Port Table
Parameter Description
ip-address Valid IP address of the destination host.
hostname Hostname of the destination host. (Range: 1–158 characters).
The command allows spaces in the host name when
specified in double quotes. For example,
console(config)#snmp-server host "host
name"
port A decimal TCP port number, or one of the keywords from the
port table in the usage guidelines (see
Port Table below).
keyword One or more keywords from the keywords table in the user
guidelines (see
Keywords Table below).
Options Description
/debug Enable telnet debugging mode.
/line Enable telnet linemode.
/localecho Enable telnet localecho.
<cr> Press ENTER to execute the command.
port Enter the port number. Refer to the following table.
Keyword Description Port Number
bgp Border Gateway Protocol 179
chargen Character generator 19
cmd Remote commands 514
daytime Daytime 13
discard Discard 9
domain Domain Name Service 53
echo Echo 7
2CSPC4.X8100-SWUM100.book Page 1771 Wednesday, August 29, 2012 6:23 PM