Command Line Interface Guide

1802 Web Server Commands
User Guidelines
Use this command to enter an external certificate (signed by the Certification
Authority) to the switch. To end the session, add a period (.) on a separate
line after the input, and press ENTER.
The imported certificate must be based on a certificate request created by the
crypto certificate request Privileged EXEC command.
If the public key found in the certificate does not match the switch's SSL RSA
key, the command fails.
This command is not saved in the router configuration; however, the
certificate imported by this command is saved in the private configuration
(which is never displayed to the user or backed up to another switch).
Example
The following example imports a certificate sighed by the Certification
Authority for HTTPS.
console(config)#crypto certificate 1 import
-----BEGIN CERTIFICATE-----
dHmUgUm9vdCBDZXJ0aWZpZXIwXDANBgkqhkiG9w0BAQEFAANLADBI
AkEAp4HS
nnH/xQSGA2ffkRBwU2XIxb7n8VPsTm1xyJ1t11a1GaqchfMqqe0km
fhcoHSWr
yf1FpD0MWOTgDAwIDAQABo4IBojCCAZ4wEwYJKwYBBAGCNxQCBAYe
BABDAEEw
CwR0PBAQDAgFGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFAf4
MT9BRD47
ZvKBAEL9Ggp+6MIIBNgYDVR0fBIIBLTCCASkwgdKggc+ggcyGgcls
ZGFwOi8v
L0VByb3h5JTIwU29mdHdhcmUlMjBSb290JTIwQ2VydGlmaWVyLENO
PXNlcnZl
-----END CERTIFICATE-----
Certificate imported successfully.
2CSPC4.X8100-SWUM100.book Page 1802 Wednesday, August 29, 2012 6:23 PM