Command Line Interface Guide

Web Server Commands 1805
Syntax
ip http port port-number
no ip http port
• port-number — Port number for use by the HTTP server. (Range:
1–65535)
Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
The HTTP TCP port should not be set to a value that might conflict with
other well-known protocol port numbers used on this switch.
Example
The following example shows how the http port number is configured to 100.
console(config)#ip http port 100
ip http server
Use the ip http server command in Global Configuration mode to enable the
switch to be configured, monitored, or modified from a browser. To disable
this function use the no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
The default mode is enabled.
2CSPC4.X8100-SWUM100.book Page 1805 Wednesday, August 29, 2012 6:23 PM