Command Line Interface Guide

1806 Web Server Commands
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the switch to be configured from a browser.
console(config)#ip http server
ip http secure-certificate
Use the ip http secure-certificate command in Global Configuration mode to
configure the active certificate for HTTPS. To return to the default setting,
use the no form of this command.
Syntax
ip http secure-certificate number
no ip http secure-certificate
Parameter Description
Default Configuration
The default value of the certificate number is 1.
Command Mode
Global Configuration mode
Parameter Description
number Specifies the certificate number. (Range: 1–2)
2CSPC4.X8100-SWUM100.book Page 1806 Wednesday, August 29, 2012 6:23 PM