Command Line Interface Guide

Web Server Commands 1807
User Guidelines
The HTTPS certificate is generated using the crypto certificate generate
command in Global Configuration mode.
Example
The following example configures the active certificate for HTTPS.
console(config)#ip http secure-certificate 1
ip http secure-port
Use the ip http secure-port command in Global Configuration mode to
configure a TCP port for use by a secure web browser to configure the switch.
To use the default port, use the no form of this command.
Syntax
ip http secure-port port-number
no ip http secure-port
Parameter Description
Default Configuration
This default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS TCP port should not be set to a value that might conflict with
other well known protocol port numbers used on this switch.
Parameter Description
port-number Port number for use by the secure HTTP server. (Range:
1–65535)
2CSPC4.X8100-SWUM100.book Page 1807 Wednesday, August 29, 2012 6:23 PM