Command Line Interface Guide

Using the CLI 183
Line Interface From Global
Configuration
mode, use the line
command.
console(config-line)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Management
Access-List
From Global
Configuration
mode, use the
management
access-list
command.
console(config-macal)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Policy-Class-Map From Global
Configuration
mode, use the
policy-map class
command.
console(config-policy-
classmap)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Class-Map From Global
Configuration
mode, use the class-
map command.
console(config-classmap)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSPC4.X8100-SWUM100.book Page 183 Wednesday, August 29, 2012 6:23 PM