Command Line Interface Guide

Using the CLI 185
Radius From Global
Configuration
mode, use the
radius-server host
command.
console(config-radius)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
SNMP Host
Configuration
From Global
Configuration
mode, use the
snmp-server
command.
console(config-snmp)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
SNMP v3 Host
Configuration
From Global
Configuration
mode, use the
snmp-server v3-host
command.
console(config-snmp)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
SNMP
Community
Configuration
From Global
Configuration
mode, use the
snmp-server
community
command.
console(config-snmp)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSPC4.X8100-SWUM100.book Page 185 Wednesday, August 29, 2012 6:23 PM