Command Line Interface Guide

Using the CLI 187
MST From Global
Configuration
mode, use the
spanning-tree mst
configuration
command.
console(config-mst)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
VLAN Config From Global
Configuration
mode, use the vlan
database command.
console(config-vlan)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Router OSPF
Conf
From Global
Configuration
mode, use the
router ospf
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
Router RIP
Config
From Global
Configuration
mode, use the
router rip
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSPC4.X8100-SWUM100.book Page 187 Wednesday, August 29, 2012 6:23 PM