Command Line Interface Guide

Address Table Commands 299
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, the mac address-table tables are cleared.
console#clear mac address-table dynamic
mac address-table aging-time
Use the mac address-table aging-time command in Global Configuration
mode to set the aging time of the address. To restore the default, use the no
form of the mac address table aging-time command.
Syntax
mac address-table aging-time { 0 | 10-1000000 }
no mac address-table aging-time
Parameter Description
interface-id Delete all dynamic MAC addresses on the specified physical
port or port channel.
vlan-id Delete all dynamic MAC addresses for the specified VLAN. The
range is 1 to 4093.
Parameter Description
0 Disable aging time for the MAC Address Table
Parameter Description
2CSPC4.X8100-SWUM100.book Page 299 Wednesday, August 29, 2012 6:23 PM