Command Line Interface Guide

304 Address Table Commands
mac address-table multicast forward-all
Use the mac address-table multicast forward-all command in Interface
Configuration mode to enable forwarding of all Multicast packets. To restore
the default, use the no form of the mac address-table multicast forward-all
command.
Syntax
mac address-table multicast forward-all vlan vlan-id
no mac address-table multicast forward-all vlan vlan-id
Parameter Description
Default Configuration
Forward-unregistered.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
In this example, all VLAN1 Multicast packets are forwarded.
console(config)#mac address-table multicast forward-
all vlan 1
Parameter Description
vlan
vlan-id A valid VLAN ID (Range 1-4093).
2CSPC4.X8100-SWUM100.book Page 304 Wednesday, August 29, 2012 6:23 PM