Command Line Interface Guide

Address Table Commands 313
Vlan Mac Address Type Port
---- ---------------- ---------- -----------
0 001E.C9AA.AE19 Management CPU Interface: 0/5/
1 001E.C9AA.AC19 Dynamic Gi1/0/21
1 001E.C9AA.AE1B Management Vl1
10 001E.C9AA.AE1B Management Vl10
90 001E.C9AA.AE1B Management Vl90
Total MAC Addresses in use: 5
show mac address-table address
Use the show mac address-table address command in User EXEC or
Privileged EXEC mode to display all entries in the bridge-forwarding database
for the specified MAC address.
Syntax
show mac address-table address mac-address [interface interface-id ] [vlan
vlan-id ]
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan-id Display entries for the specific VLAN only. The range is 1 to
4093.
2CSPC4.X8100-SWUM100.book Page 313 Wednesday, August 29, 2012 6:23 PM