Command Line Interface Guide

314 Address Table Commands
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, the mac address table entry for 0000.E26D.2C2A is
displayed.
console#show mac address-table address 0000.E26D.2C2A
Vlan Mac Address Type Port
---- -------------- -------- -------------
1 0000.E26D.2C2A Dynamic 1/0/1
show mac address-table count
Use the show mac address-table count command in User EXEC or Privileged
EXEC mode to display the number of addresses present in the Forwarding
Database.
Syntax
show mac address-table count [vlan vlan-id | interface interface-id ]
Parameter Description
Default Configuration
This command has no default configuration.
Parameter Description
interface-id Specify an interface type; valid interfaces include physical ports
and port channels.
vlan-id Specify a valid VLAN, the range is 1 to 4093.
2CSPC4.X8100-SWUM100.book Page 314 Wednesday, August 29, 2012 6:23 PM