Command Line Interface Guide

Address Table Commands 315
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show mac address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show mac address-table dynamic
Use the show mac address-table command in User EXEC or Privileged EXEC
mode to display all dynamic entries in the bridge-forwarding database.
Syntax
show mac address-table dynamic [address mac-address ] [interface interface-
id
] [vlan vlan-id ]
Parameter Description
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan-id Display entries for the specific VLAN only. The range is 1 to
4093.
2CSPC4.X8100-SWUM100.book Page 315 Wednesday, August 29, 2012 6:23 PM