Command Line Interface Guide

316 Address Table Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all dynamic entries in the mac address-table are displayed.
console#show mac address-table dynamic
Aging time is 300 Sec
Vlan Mac Address Type Port
---- -------------- ------- -------------
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1
show mac address-table interface
Use the show mac address-table command in User EXEC or Privileged EXEC
mode to display all entries in the mac address-table.
Syntax
show mac address-table interface interface-id [vlan vlan-id ]
2CSPC4.X8100-SWUM100.book Page 316 Wednesday, August 29, 2012 6:23 PM