Command Line Interface Guide

Address Table Commands 317
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database for
gigabit Ethernet interface 1/0/1 are displayed.
console#show mac address-table interface
gigabitethernet 1/0/1
Aging time is 300 Sec
Vlan Mac Address Type Port
---- -------------- ---- -------------
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1
Parameter Description
interface-id Specify an interface type.Valid interfaces include physical ports
and port channels.
vlan-id Specify a valid VLAN. The range is 1 to 4093.
2CSPC4.X8100-SWUM100.book Page 317 Wednesday, August 29, 2012 6:23 PM