Command Line Interface Guide

318 Address Table Commands
show mac address-table static
Use the show mac address-table static command in User EXEC or Privileged
EXEC mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address mac-address ] [interface interface-id ]
[vlan
vlan-id ]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all static entries in the bridge-forwarding database are
displayed.
console#show mac address-table static
Vlan Mac Address Type Port
---- -------------- ----- -----
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Specify an interface type; valid interfaces include physical ports
and port channels.
vlan-id Specify a valid VLAN; the range is 1 to 4093.
2CSPC4.X8100-SWUM100.book Page 318 Wednesday, August 29, 2012 6:23 PM