Command Line Interface Guide

Address Table Commands 319
1 0001.0001.0001 Static gi1/0/1
show mac address-table vlan
Use the show mac address-table vlan command in User EXEC or Privileged
EXEC mode to display all entries in the bridge-forwarding database for the
specified VLAN.
Syntax
show mac address-table [vlan vlan-id ]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed.
console#show mac address-table vlan 1
Mac Address Table
-------------------------------------
Vlan Mac Address Type Ports
---- --------------- ------- -------
Parameter Description
vlan-id Specify a valid VLAN; the range is 1 to 4093.
2CSPC4.X8100-SWUM100.book Page 319 Wednesday, August 29, 2012 6:23 PM