Command Line Interface Guide

320 Address Table Commands
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1
Total Mac Addresses for this criterion: 5
show ports security
Use the show ports security command in Privileged EXEC mode to display
the port-lock status.
Syntax
show ports security [{gigabitethernet unit/slot/port| port-channel port-
channel-number
| tengigabitethernet unit/slot/port | fortygigabitethernet
unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the port-lock status are displayed.
console#show ports security
Port Status Action Maximum Trap Frequency
---- ------ ---------- -------- ------- -------
2CSPC4.X8100-SWUM100.book Page 320 Wednesday, August 29, 2012 6:23 PM