Command Line Interface Guide

350 DHCP Layer 2 Relay Commands
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
show dhcp l2relay agent-option vlan
Use the show dhcp l2relay agent-option vlan command in Privileged EXEC
mode to display DHCP L2 Relay Option-82 configuration specific to VLANs.
Syntax
show dhcp l2relay agent-option vlan vlan-range
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
Parameter Description
all Show all interfaces.
interface-id A physical interface.
Parameter Description
vlan-range Show information for the specified VLAN range. A range may
be a single VLAN ID or two VLAN IDs separated by a single
dash with no embedded spaces.
2CSPC4.X8100-SWUM100.book Page 350 Wednesday, August 29, 2012 6:23 PM