Command Line Interface Guide

376 DHCP Snooping Commands
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface interface-id ]
[vlan
vlan-id ]
• static | dynamic —Use these keywords to filter by static or dynamic
bindings.
•
interface-id —The interface for which to show bindings.
•
vlan-id —The number of the VLAN for which to show bindings.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address VLAN Interface
Lease time(Secs)
------------------ ------------ ---- --------- --
-----------
00:02:B3:06:60:80 210.1.1.3 10 1/0/1
86400
2CSPC4.X8100-SWUM100.book Page 376 Wednesday, August 29, 2012 6:23 PM