Command Line Interface Guide

Dynamic ARP Inspection Commands 395
The following fields are displayed for each VLAN:
Example
console#show ip arp inspection vlan 10-12
Source Mac Validation : Disabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration Log Invalid ACL Name
Static flag
---- ------------- ----------- -------
-- ----------
10 Enabled Enabled H2
Enabled
11 Disabled Enabled
12 Enabled Disabled
Destination Mac
Validatio n
If Destination Mac validation of ARP Response frame is
enabled.
IP Address Validation If IP address validation of ARP frame is enabled.
Field Description
VLAN The VLAN-ID for each displayed row.
Configuration Whether DAI is enabled on the VLAN.
Log Invalid Whether logging of invalid ARP packets is enabled on the
VLAN.
ACL Name ARP ACL Name if configured on the VLAN.
Static flag If the ARP ACL is configured static on the VLAN.
2CSPC4.X8100-SWUM100.book Page 395 Wednesday, August 29, 2012 6:23 PM