Command Line Interface Guide

Ethernet Configuration Commands 429
show interfaces description
Use the show interfaces description command in User EXEC mode to
display the description for all configured interfaces.
Syntax
show interfaces description [gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet
unit/slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Trans mitte d Pause
Frames
Counted MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE operation.
Received PFC Frames A count of the received Priority Flow Control (PFC)
frames.
Trans mitte d PFC
Frames
A count of the transmitted PFC frames.
Field Description
2CSPC4.X8100-SWUM100.book Page 429 Wednesday, August 29, 2012 6:23 PM