Command Line Interface Guide

460 Ethernet CFM Commands
show ethernet cfm errors
Use the show ethernet cfm errors command in Privileged EXEC mode to
display the cfm errors.
Syntax
show ethernet cfm errors {domain domain-id | level 0-7 }
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show ethernet cfm errors
----- ---- ---- --------- ------------ ------------ -
---------- ----------
Level SVID MPID DefRDICcm DefMACStatus DefRemoteCCM
DefErrorCCM DefXconCCM
----- ---- ---- --------- ------------ ------------ -
---------- ----------
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
level Maintenance association level
2CSPC4.X8100-SWUM100.book Page 460 Wednesday, August 29, 2012 6:23 PM