Command Line Interface Guide

Ethernet CFM Commands 461
show ethernet cfm domain
Use the show ethernet cfm domain command in Privileged EXEC mode to
display the configured parameters in a maintenance domain.
Syntax
show ethernet cfm domain {brief | domain-id }
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console # show Ethernet cfm domain domain1
Domain Name : domain1
Level : 1
Total Services : 1
---- ----------------------------------- ------------------
VLAN ServiceName CC-Interval (secs)
---- ----------------------------------- ------------------
10 serv1 1
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
2CSPC4.X8100-SWUM100.book Page 461 Wednesday, August 29, 2012 6:23 PM