Command Line Interface Guide

462 Ethernet CFM Commands
show ethernet cfm maintenance-points local
Use the show ethernet cfm maintenance-points local command in Privileged
EXEC mode to display the configured local maintenance points.
Syntax
show ethernet cfm maintenance-points local {level 0-7 | interface interface-
id
| domain domain-name }
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
show ethernet cfm maintenance-points local level 1
---- ----- ---- ---- ------ ----- -------- ------ ----------- -----
----
MPID Level Type VLAN Port Dire- CC MEP- Operational MAC
ction Transmit Active Status
---- ----- ---- ---- ------ ----- -------- ------ ----------- -----
----
1 1 MEP 10 1/0/1 UP Enabled True
00:02:bc:02:02:02
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
level Maintenance association level
interface-id Show all MPs associated with the interface.
2CSPC4.X8100-SWUM100.book Page 462 Wednesday, August 29, 2012 6:23 PM