Command Line Interface Guide

Ethernet CFM Commands 463
----- ---- ------ -----------------
Level Type Port MAC
----- ---- ------ -----------------
show ethernet cfm maintenance-points remote
Use the show ethernet cfm maintenance-points remote command in
Privileged EXEC mode to display the configured remote maintenance points.
Syntax
show ethernet cfm maintenance-points remote {level 0-7 | domain domain-
name
| detail [mac mac-address | mep MEPId ] [domain domain-name |
level
0-7 ] [vlan vlan-id ]}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
level Maintenance association level
mac-address The destination MAC address for which the information is
desired.
vlan-id A VLAN associated with the maintenance domain. Range: 1-
4094.
mpid The MEP ID from which the link trace message is to be
transmitted.
2CSPC4.X8100-SWUM100.book Page 463 Wednesday, August 29, 2012 6:23 PM