Command Line Interface Guide

466 Ethernet CFM Commands
CCM's transmitted : 1
In-order Loopback Replies received : 0
Out-of-order Loopback Replies received: 0
Bad MSDU Loopback Replies received : 0
Loopback Replies transmitted : 5
Unexpected LTR's received : 0
debug cfm
Use the debug cfm command in Privileged EXEC mode to enable CFM
debugging. Use the no form of the command to disable debugging.
Syntax
debug cfm {event | {pdu {all | ccm | ltm | lbm |} {tx | rx}}}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
Parameter Description
event CFM events
pdu CFM PDUs
ccm Continuity check messages
ltm Link trace messages
lbm Loopback messages
tx Transmit only
rx Receive only
all Everything
2CSPC4.X8100-SWUM100.book Page 466 Wednesday, August 29, 2012 6:23 PM