Command Line Interface Guide

IP Addressing Commands 525
Example
console#show ip address-conflict
Address Conflict Detection Status...Conflict Detected
Last Conflicting IP Address.........10.131.12.56
Last Conflicting MAC Address........00:01:02:04:5A:BC
Time Since Conflict Detected........5 days 2 hrs 6
mins 46 secs
console#show ip address-conflict
Address Conflict Detection Status..No Conflict
Detected
show ip helper-address
Use the show ip helper-address command in Privileged EXEC mode to
display IP helper addresses configuration.
Syntax
show ip helper-address [ intf-address ]
• intf-address — IP address of a routing interface. (Range: Any valid IP
address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
2CSPC4.X8100-SWUM100.book Page 525 Wednesday, August 29, 2012 6:23 PM