Command Line Interface Guide

IPv6 MLD Snooping Commands 545
ipv6 mld snooping (VLAN)
The ipv6 mld snooping (VLAN) command enables MLD Snooping on a
particular VLAN and enables MLD snooping on all interfaces participating in
a VLAN.
Syntax
ipv6 mld snooping vlan-id
no ipv6 mld snooping vlan-id
• vlan-id — Specifies a VLAN ID value.
Default Configuration
MLD Snooping is disabled.
Command Mode
VLAN Database mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-vlan)#ipv6 mld snooping 1
show ipv6 mld snooping
The show ipv6 mld snooping command displays MLD Snooping
information. Configured information is displayed whether or not MLD
Snooping is enabled.
Syntax
show ipv6 mld snooping [interface {{gigabitethernet unit/slot/port| port-
channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}} | vlan
vlan-id }]
2CSPC4.X8100-SWUM100.book Page 545 Wednesday, August 29, 2012 6:23 PM