Command Line Interface Guide

IPv6 MLD Snooping Commands 547
• Multicast Router Present Expiration Time — Displays the amount of time
to wait before removing an interface that is participating in the VLAN
from the list of interfaces with multicast routers attached. The interface is
removed if a query is not received. This value may be configured.
show ipv6 mld snooping groups
The show ipv6 mld snooping groups command displays the MLD Snooping
entries in the MFDB table.
Syntax
show ipv6 mld snooping groups [{vlan vlan-id | address ipv6-multicast-
address
}]
• vlan_id — Specifies a VLAN ID value.
•
ipv6-multicast-address — Specifies an IPv6 Multicast address.
Default configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 mld snooping groups
Vlan Ipv6 Address Type Ports
---- ----------------------- ------- ---------------------------
1 3333.0000.0003 Dynamic 1/0/1,1/0/3
2 3333.0000.0004 Dynamic 1/0/1,1/0/3
2 3333.0000.0005 Dynamic 1/0/1,1/0/3
MLD Reporters that are forbidden statically:
2CSPC4.X8100-SWUM100.book Page 547 Wednesday, August 29, 2012 6:23 PM