Command Line Interface Guide

iSCSI Optimization Commands 571
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address Name
860 --
3260 --
30001 172.16.1.1iqn.1993-11.com.disk-
vendor:diskarrays.sn.45678.tape:sys1.xyz
30033172.16.1.10
------------------------------------------------
iSCSI Static Rule Table
------------------------------------------------
Index TCP Port IP Address IP Address Mask
TCP Port Target IP AddressName
show iscsi sessions
Use the show iscsi sessions command in Privileged EXEC mode to display the
iSCSI status.
Syntax
show iscsi sessions [detailed]
• detailed — Displayed list has additional data when this option is used.
Default Configuration
If not specified, sessions are displayed in short mode (not detailed).
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
2CSPC4.X8100-SWUM100.book Page 571 Wednesday, August 29, 2012 6:23 PM