Command Line Interface Guide

594 LLDP Commands
• detail — includes a detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Specify
either
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port
or
fortygigabitethernet unit/slot/port.
•
all — Shows lldp local device information on all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
These examples show advertised LLDP local data in two levels of detail.
console#show lldp local-device all
LLDP Local Device Summary
Interface Port ID Port Description
--------- -------------------- --------------------
1/0/1 00:62:48:00:00:02
console# show lldp local-device detail 1/0/1
LLDP Local Device Detail
Interface: 1/0/1
Chassis ID Subtype: MAC Address
Chassis ID: 00:62:48:00:00:00
Port ID Subtype: MAC Address
Port ID: 00:62:48:00:00:02
2CSPC4.X8100-SWUM100.book Page 594 Wednesday, August 29, 2012 6:23 PM