Command Line Interface Guide

LLDP Commands 595
System Name:
System Description: Routing
Port Description:
System Capabilities Supported: bridge, router
System Capabilities Enabled: bridge
Management Address:
Type: IPv4
Address: 192.168.17.25
—
— —
show lldp remote-device
Use the lldp remote-device command in Privileged EXEC mode to display
the current LLDP remote data. This command can display summary
information or detail for each interface.
Syntax
show lldp remote-device {detail interface | interface | all}
• detail — Includes detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Substitute
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port or
fortygigabitethernet unit/slot/port }
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM100.book Page 595 Wednesday, August 29, 2012 6:23 PM